Red Black Diamond Pleated Golf Cart Seat Covers For EZGO TXT 1994-13,

Huskey 4PCS Golf Cart Front Rear Seat Covers for EZGO Medalist, TXT1994-2013 Gas and Electric Models, Custom Fit Red Diamond Stitching Insert Panel and Piping, Marine Grade Vinyl, Staple On Design

𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧: These Black Red golf cart seat covers will only fit Front & Rear Seats of EZGO Medalist, TXT 1994-2013 gas & electric golfcarts. 𝗡𝗢𝗧𝗘: If you have aftermarket front seat, modified front seat, A two-piece lean back or Executive Deluxe Seats, our seat covers may NOT fit. Please check with us before purchasing. The Rear Seat lean back sizes need to be 35” x 12” and the rear seat bottom sizes need to be 37.5” x 14”. Otherwise, they may not fit.

𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: Replace your worn and torn old seat cover with Huskey's golfcart seat cover to give your cart a complete new and upgraded look.

𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: These seat covers have 1/2 𝒊𝒏𝒄𝒉𝒕𝒉𝒊𝒄𝒌 extra foam padding to give you a more cushioned ride. In addition, our insert panels are single diamond stitched providing a higher quality look and feel. We use piping on exterior panels, giving your cart a luxurious look. We use high quality 𝒎𝒂𝒓𝒊𝒏𝒆𝒈𝒓𝒂𝒅𝒆 𝒗𝒊𝒏𝒚𝒍 treated with UV inhibitors which ensures our seat covers will not fade over time. The material we use is also guaranteed not to crack in cold weather.

𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧𝐬: Huskey Golf Cart Seat covers are designed to be stapled over the original seats. We include step by step installation instructions in the package.

𝟏 𝐘𝐞𝐚𝐫 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲: Huskey is confident about its products and ensures high quality so we provide a 1-year warranty to our products. Please feel free to contact us if you have any questions before /after purchasing.

FOR EZGO Medalist & TXT models (1994 to 2013): The serial number and manufacturer's number can be found on a plate located in the glove box on the passenger's side of the vehicle. The serial number is either six or seven numbers and does not indicate the model year. The manufacturer's number does reflect the model year. This series will have one letter and three or four numbers which will include two numbers indicating the last two digits of the year it was manufactured. Newer EZ-GO carts have the words "TXT", "Freedom TXT","RXV" or "Freedom RXV" listed on the side of the cart, located vertically beneath the armrests. Once you have the serial number, then enter your serial number into the top left search box on the EZGO website to verify the make and model of your cart!

·       1x Front Lean Back Cover (Will not fit two pieces’ seat back)

·       1x Front Seat Bottom Cover

·       1x Rear Seat Lean Back Cover (will fit most rear seats in the market) Approx. Seat Back size: 35"x12"

·       1x Rear Seat Bottom Cover (will fit most seats in the market) Approx. Seat Bottom Size: 37.5"x14";

𝐖𝐇𝐄𝐍 𝐃𝐎 𝐈 𝐍𝐄𝐄𝐃 𝐓𝐎 𝐑𝐄𝐏𝐋𝐀𝐂𝐄 𝐓𝐇𝐈𝐒 𝐏𝐀𝐑𝐓?

Golf cart seat cushions take a lot of abuse, as passengers continually get in and out of your golf cart. Cracks and tears may begin to occur with extended use and that is the perfect time to change your seat covers.

𝐇𝐎𝐖 𝐓𝐎 𝐈𝐍𝐒𝐓𝐀𝐋𝐋 𝐓𝐇𝐈𝐒 𝐏𝐀𝐑𝐓?

STAPLE -ON SEAT COVER SET

𝐒𝐄𝐀𝐓 𝐁𝐎𝐓𝐓𝐎𝐌:

1. Remove the seat from the cart.

2. Remove arms and hinges.

3. Center new seat cover over old, pulling corners evenly.

4. Snug up seat cover and temporarily tack or staple into place.

5. Check for proper fit before proceeding, making adjustments as necessary.

6. Staple permanently.

𝐒𝐄𝐀𝐓 𝐁𝐀𝐂𝐊:

1. Remove back cap if it has one. Center new seat cover over old, pulling corners evenly.

2. With the back cover properly fitted, temporarily staple along the bottom of back rest.

3. Some models have a dip in the top of the backrest, so you will need to make relief cuts in the fabric. (Be careful not to cut too deep)

4. Pull fabric until it conforms to this dipped area and staple into place. More cuts may be needed. Be careful not to rip the fabric at buts when pulling.

5. Staple permanently.

BE SURE TO STAPLEALL SEAMS BEFORE TRIMMING. DO NOT USE BLEACH!

WE SHIP WITHIN 1 BUSINESS DAY FROM SOUTHERN INDIANA.